The wall socket must be located near the equipment and must be easily accessible.Never use abrasive cleaners or chemical solvents as this can damage the products. Never submerge the power supply unit or hub in water. To clean the hub and the power supply unit, wipe with a soft cloth moistened with a small amount of mild cleaning agent. Unplug the power supply unit from the power source before cleaning and when the hub is not in use. Note this deletes all previous hub information.įollow the instructions in the app to add “Works with IKEA Home smart” devices to the hub. The centre light will then blink red 4 times when the hub is ready. Push a pin into the pinhole on the underside of the hub until the status lights turn off. This will not delete information on your hub. The ring light fills to symbolise loading while starting up. When your hub is updating or busy processing a large amount of information.ĭisconnect and reconnect the power to your hub to reboot it. You can continue to control your devices through the app and your home WiFi network. Shown when the hub is disconnected from the internet. Shown when the hub is connected to the internet and everything is OK. You can now follow the instructions in the app to connect your hub. This is shown once your hub has finished starting up. Wait for the light to fill the ring before proceeding with connecting the hub to the app. Shown when the hub is connected to power and is starting up. The app will take you through the process of installing your hub and other devices. Go to the Google Play store and download the IKEA Home smart app. Go to the App Store and download the IKEA Home smart app. Then plug the power supply unit into the wall socket. Connect the USB cable to the power supply unit and your hub.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |